Heat power equipment

Heat power equipment

Boilers for water

Boilers for hot water type SWR with a capacity of up to 12 MW.

Boilers steel water-heating two-pass designed for the production of coolant in heating systems and hot water production plants, administrative and public buildings and residential buildings, as well as technological facilities.

Advantages of boilers:
– High efficiency of boilers with low emission of harmful gases.
– The operation of the boiler as with the discharge in the furnace, and under the supercharging.
– Reliability, durability and ease of use.
– Complete readiness of the boiler for installation.
– Reduced requirements for water inlet temperature.
– Minimum hydraulic resistance.
– Use of highly efficient automated burners of domestic and foreign manufacturers.
– Small inertia.

The device and operation of the boiler SWR:
The boiler consists of a casing, a front cover, a duct for flue gas discharge, supports, thermal insulation and a decorative casing. The boiler body is of a cylindrical shape, it includes a combustion chamber, a front and a back trumpet, a convective gas flue, a front swivel chamber and an outer shell. The combustion chamber is cylindrical, it is made in the form of a flame tube and a rear rotary flame chamber, a rear tube board.
The flange of the burner is welded to the front wall. The bottom of the combustion chamber and the rear tube board form a plastic system that compensates for the temperature elongations of the flame tube. The convective gas flue of the boiler is made of seamless smoke tubes. Pipes are grouped and welded into tube boards. Between the bundles of smoke tubes for inspection and cleaning of the boiler on the water side are gaps.

Mobile boiler plants
Installation boiler room transportable type PKN.
LLP AtyrauNefteMash produces steam block boiler plants of series PKN on the basis of boilers of series E, Em with a steam capacity of 1 t / h, working on all types of fuel. These boiler rooms are widely used in many sectors of the national economy, including the oil and gas industry and are designed to produce saturated steam with a working pressure of 0.8 MPa.

LLP AtyrauNefteMash produces steam block boiler plants of series PKN on the basis of boilers of series E, Em with a steam capacity of 1 t / h, working on all types of fuel. These boiler rooms are widely used in many sectors of the national economy, including the oil and gas industry and are designed to produce saturated steam with a working pressure of 0.8 MPa.

Technical features

Boiler type: ПКН-2ГМ
Boilers quantity / boiler type 1 boiler / Е-1.0-0.9 ГМ

Nominal steam capacity, t / h 1
Working pressure of saturated steam, MPa (kgf / cm²), not more than 0.8 (8.0)
Fuel gas, diesel fuel, oil, fuel oil
Module weight, t, no more than 9,5
Overall dimensions, m: without huts
length 6,2
width 3.16
height 3.17
with a pipe 19.45
Number of modules 1

Air heating units
Air heater GNVT-100, 250 KW.

Are intended for heating of industrial premises, warehouses, under construction objects. Air capacity up to 25 000 m3 / h with a temperature of 850 ° C.
According to the technical requirement, it is possible to develop and manufacture units of the type GNVT with the capacity of 80, 120, 150, 200, 320 kW.

Burners CIB Unigas (Italy), installed on products manufactured by LLP AtyrauNefteMash
Burners
IDEA Burners 35-70-90-120-140-200 (M02958VB)
Burners IDEA 240-400-550 (M02956VC)
Gas Burners Low NOx (M02961VB)
Burners Technocress (M02962VB)